Probe type	Standard probe
Dimensions	Ø15 x 83 mm
Weight	10 g
Operating range electronics	-50…100 °C / 0…100 %rh
Accuracy w. adjustment profile "standard"	±0.8 %RH / ±0.1 K, at 10...30 °C at 23 °C und 10, 35, 80 %RH
Accuracy w. adjustment profile "High Precision"	±0.5 %RH / ±0.1 K, at 10...30 °C at 23 °C and 10, 20, 30, 40, 50, 60, 70, 80, 90 %RH
Power supply / Power consumption	3.3…5 VDC
Current consumption	4.5 mA at 3.3 VDC
Long-term stability sensor	<1 %rh / year
Humidity sensor	Hygromer IN-1
Temperature sensor	Pt100 Class A
Probe protection	Polycarbonate plastic cage, black
Filter cartridge	Polyethylene
Filter type	Wire mesh filter
Response time t 63	<15 sec.
Allowed wind speed	20 m/s, with filtre
Psychrometric calculations	Dew or frost point
Reproducibility Airchip	<0.02 %rh / 0.01 K
Exploitation software	ROTRONIC HW4.2
Probe adjustment by software	1 Point & multipoint %rh & °C
Firmware update	With internet and HW4 software
User information	from Software HW4 (devicemanager)
Data processing via HW4	with interface cables
Device Protection by password	Yes
Type of output signals	2 x 0…1 VDC
Analogue outputs scaleable by the user	Yes
Analog output signal (standard)	0…1 V = 0…100 %rh; 0…1 V = -40…60 °C
Digital output signal (standard)	UART
Service Interface	UART
Reverse voltage protection	Mechanically in the connector
Max. cable length	5 m
Probe material	PEEK
Enclosure material	Polycarbonate
Housing	Polycarbonate
FDA/GAMP compatibility	FDA 21 CFR Part 11 and GAMP compatible