Probe type	High-Temperature Handheld Probe
Weight	210 g / 240 g
Operating range electronics	-40…100 °C / 0…100 %rh
Accuracy at 23 ±5 °C	±0.8 %rh / ±0.1 K
Accuracy w. adjustment profile "standard"	at 23 °C / 10, 35, 80 %rh ± 0.8 %rh / ± 0.1 K
Power supply / Power consumption	3.2…5 VDC ±0 % / < 4.5 mA
Long-term stability sensor	<1 %rh / year
Humidity sensor	Hygromer IN-1
Temperature sensor	PT100 1/3 DIN Class B
Probe protection	Filter carrier, brass nickelplated
Filter cartridge	Wire mesh, 20...25 um
Response time t 63	<15 sec.
Allowed wind speed	20 m/s, with filtre
Psychrometric calculations	Dew or frost point
Reproducibility Airchip	<0.02 %rh / 0.01 K
Exploitation software	ROTRONIC HW4.2
Probe adjustment by software	1 Point & multipoint %rh & °C
Firmware update	With internet and HW4 software
User information	from Software HW4 (devicemanager)
Data processing via HW4	with interface cables
Device Protection by password	Yes
Type of output signals	2 x 0…1 VDC
Analogue outputs scaleable by the user	Yes
Analog output signal (standard)	0…1 V = 0…100 %rh; 0…1 V = -40…60 °C
Digital output signal (standard)	UART
Service Interface	UART
Reverse voltage protection	Mechanically in the connector
Max. cable length	2 m
Probe material	PEEK
Enclosure material	POM handle / sensor tube: PPS, black
FDA/GAMP compatibility	FDA 21 CFR Part 11 and GAMP compatible